Free tool

Pool Volume & Chemical Calculator

Find out how many gallons your pool holds, then enter your test readings to see how much of each chemical to add. Built by the team at Aquarian Pool & Spa, serving Southeastern Massachusetts.

Your pool holds about
7,250gallons
18 ft round, 3.8 ft deep

Pool size

Measure from the water line down. If one end is deeper, add the shallow and deep depths and divide by 2.

Test readings

These are example readings. Type in your own from a test strip or kit.

Free chlorine

Ideal 2 to 4 ppm
Low
Add 19 fl oz (about 2¼ cups) of Liquid chlorine 12.5% to reach 3 ppm.
Pour it slowly in front of a return with the pump running, ideally in the evening.

pH

Ideal 7.2 to 7.6
High
Add 11 fl oz (about 1¼ cups) of muriatic acid (31.45%) now, then retest.
Full estimate to reach 7.4: 22 fl oz (about 2¾ cups). Add half first, run the pump an hour, then retest.
Acid also lowers alkalinity a little. Pour it into the deep end or in front of a return, never near the skimmer.

Total alkalinity

Ideal 80 to 120 ppm
Low
Add 3 lb 1 oz of baking soda (sodium bicarbonate).
Spread it across the water with the pump running and retest after 6 hours. It also nudges pH up a little.

Stabilizer (CYA)

Ideal 30 to 50 ppm
Low
Add 1 lb 3 oz of stabilizer (cyanuric acid).
Dissolve in warm water in a bucket, or put it in a sock in front of the skimmer. It dissolves slowly, so retest after a few days.

Calcium hardness

Ideal 200 to 400 ppm
Low
Add 8 lb 11 oz of calcium chloride (77% flake).
Dissolve it in a bucket of water first because it heats up, then pour it in with the pump running. Retest after 6 hours.

5 adjustments needed (5 of 5 readings entered).

Before you add anything

  • Adjust one thing at a time with the pump running. Order that works well: alkalinity, then pH, then stabilizer, then chlorine.
  • Wait at least an hour between chemicals, and retest after 6 to 8 hours before adding more.
  • Never mix chemicals. Add chemicals to water, never water to chemicals. Use gloves and goggles.
  • On a vinyl liner, dissolve granular chemicals in a bucket of pool water first. Granules sitting on the liner can bleach or damage it.
  • Keep swimmers out while chlorine is above 5 ppm, and after adding acid or shock until the water has circulated.

These amounts are estimates based on common product strengths. Always follow the label on your product. The ideal chlorine range of 2 to 4 ppm assumes stabilizer (CYA) between 30 and 50 ppm.

Typical pool sizes in gallons

Approximate, with about 3.8 feet of water.

PoolGallons
12 ft round3,200
15 ft round5,000
18 ft round7,250
21 ft round9,850
24 ft round12,850
27 ft round16,300
30 ft round20,100
12 x 24 ft oval6,450
15 x 30 ft oval10,050
18 x 33 ft oval13,250

Need your water tested?

Use our free Pool Helper app. Upload a photo of your test strip and it reads the colors, then gives you a step-by-step treatment plan with the reason for each step. Guides cover chlorine, saltwater and non-chlorine pools.

Try Pool Helper

Pool calculator FAQs

How do I calculate how many gallons are in my pool?

Measure the average water depth in feet. For a round pool, multiply diameter x diameter x depth x 5.9. For an oval pool, multiply length x width x depth x 5.9. For a rectangular pool, multiply length x width x depth x 7.5. The calculator above does this for you.

What should my pool water chemistry be?

A good target is free chlorine of 2 to 4 ppm, pH of 7.2 to 7.6, total alkalinity of 80 to 120 ppm, stabilizer (cyanuric acid) of 30 to 50 ppm, and calcium hardness of 200 to 400 ppm. Salt pools also need salt in the range your system calls for.

How accurate are the chemical amounts?

They are estimates based on common product strengths. Always follow the label on your product, add about half of any pH adjustment first, and retest after the water has circulated.

Need a Pool or Help With Yours?

We sell and install above ground and semi-inground pools, and we come to you. Call or request a free quote and we will meet you at your home.